background image

21

20

ABOUT BLOOD PRESSURE

ABOUT BLOOD PRESSURE

Why does my blood pressure 
fluctuate throughout the
day?

Is the result the same 
if measuring on the 
right arm?

Why do I get a different 
blood pressure at home 
compared to the hospital?

1. Individual blood pressure varies 

multiple times everyday. It is also affected 
by the way you tie your cuff and your 
measurement position, so please take the 
measurement under the same conditions.

2.If the person takes medicine, the 

pressure will vary more.

3.Wait at least 3 minutes for another 

measurement.

The blood pressure is different even 

throughout the day due to weather, 
emotion, exercise etc, Also, there is the 
“white coat” effect, which means blood 
pressure usually increases in clinical 
settings.

It is ok for both arms, but there 

will be some different results for 
different people. We suggest you 
measure the same arm every time.

What you need to pay 

attention to when you measure 
your blood pressure at home: 

If the cuff is tied properly. 
If the cuff is too tight or too loose.
If the cuff is tied on the upper arm.
If you feel anxious.
Taking 2-3 deep breaths before 

beginning will be better for measuring.        

Advice: Relax yourself for 4-5 

minutes until you calm down.

What are systolic pressure and diastolic pressure? 

press

artery

vein

blood discharging

Systolic

relax

blood entering

Diastolic  

When ventricles contract and pump blood out of the 
heart, the blood pressure reaches its maximum value 
in the cycle, which is called systolic pressure. When 
the ventricles relax, the blood pressure reaches its 
minimum value in the cycle, which is called diastolic 
pressure.

Irregular Heartbeat Detector

CAUTION

The appearance of the IHB icon indicates that a pulse irregularity consistent with an irregular 
heart-beat was detected during measurement. Usually this is NOT a cause for concern. 
However, if the symbol appears often, we recommend you seek medical advice. Please note 
that the device does not replace a cardiac examination, but serves to detect pulse irregularities 
at an early stage.

An irregular heartbeat is detected when a heartbeat rhythm varies while the unit is 
measuring the systolic and diastolic blood pressure.During each measurement, the 
monitor records all the pulse intervals and calculate the average ; if there are two or more 
pulse intervals ,the difference between each interval and the average is more than the 
average value of ±25% , or there are four or more pulse intervals ,the difference between 
each interval and the average is more than the average value of ±15%,the irregular 
heartbeat symbol appears on the display when the measurement results are appeared.

What is the standard blood pressure classification?

The chart on the right is the 

standard blood pressure classifi-

cation published by American

Heart Association (AHA).

Please consult a physician if your measuring result falls outside the range. 
Please note that only a physician can tell whether your blood pressure value 
has reached a dangerous point.

CAUTION

Blood Pressure Category

Normal

Elevated

High Blood Pressure

(Hypertension) Stage 1

High Blood Pressure

(Hypertension) Stage 2

Hypertensive Crisis

(Consult your doctor immediately)

Systolic
mmHg (upper#)

Diastolic
mmHg (lower#)

less than 120

120-129

130-139

140 or higher

Higher than 180

and

or

or

and/or

less than 80

80-89

90 or higher

Higher than 120

This chart reflects blood pressure categories defined by American Heart Association.

and

less than 80

Summary of Contents for TMB-1490-BS

















Reviews: