background image

LCD display signal

CAUTION

* The service life of the cuff may vary by the frequency of washing, skin condition, and 

storage state. The typical service life is 10000 times.

* It is recommended that the performance should be checked every 2 years and after 

maintenance and repair, by retesting at least the requirements in limits of the error of the 

cuff pressure indication and air leakage (testing at least at 50mmHg and 200mmHg).

* Please dispose of ACCESSORIES, detachable parts, and the ME EQUIPMENT 

according to the local guidelines.

* Manufacturer will make available on request circuit diagrams, component part lists, 

descriptions, calibration instructions, etc., to assist to service personnel in parts repair.

* The plug/adapter plug pins insulates the device from the main supply. Do not position the 

device in a position where it is difficult to disconnect from the supply mains to safely 

terminate operation of ME equipment.

* The operator shall not touch output of batteries/adapter and the patient simultaneously.

* Cleaning: Dust environment may affect the performance of the unit. Please use the soft 

cloth to clean the whole unit before and after use. Don’t use any abrasive or volatile 

cleaners.

* The device doesn’t need to be calibrated within two years of reliable service.

* If you have any problems with this device, such as setting up, maintaining or using, 

please contact the SERVICE PERSONNEL of Transtek. Don’t open or repair the device 

by yourself in the event of malfunctions. The device must only be serviced, repaired and 

opened by individuals at authorized sales/service centers.

* Please report to Transtek if any unexpected operation or events occur.

* Keep the unit out of reach of infants, young children or pets to avoid inhalation or 

swallowing of small parts. It is dangerous or even fatal.

* Be careful to strangulation due to cables and hoses, particularly due to excessive length.

* At least 30 min required for ME equipment to warm from the minimum storage 

temperature between uses until it is ready for intended use. At least 30 min required for 

ME equipment to cool from the maximum storage temperature between uses until it is 

ready for intended use.

* This equipment needs to be installed and put into service in accordance with the 

information provided in the ACCOMPANYING DOCUMENTS.

* Wireless communications equipment such as wireless home network devices, mobile 

phones, cordless telephones and their base stations, walkie-talkies can affect this 

equipment and should be kept at least a distance away from the equipment. The 

distance d is calculated by the MANUFACTURER from the 80MHz to 5.8 GHz column of 

Table 4 and Table 9 of IEC 60601-1-2:2014, as appropriate.

* Please use ACCESSORIES and detachable parts specified/authorized by 

MANUFACTURE. Otherwise, it may cause damage to the unit or danger to the 

user/patients.

* There is no luer lock connectors are used in the construction of tubing, there is a 

possibility that they might be inadvertently connected to intravascular fluid systems, 

allowing air to be pumped into a blood vessel.

* Please use the device under the environment which was provided in the user manual. 

Otherwise, the performance and lifetime of the device will be impacted and reduced.

* Adapter is specified as a part of ME EQUIPMENT.

SYMBOL DESCRIPTION

EXPLANATION

Irregular heartbeat detected during measurement.

Irregular heartbeat

Heartbeat

Heart rate decteted during measurement.

Systolic blood pressure

The high pressure measured.

Diastolic blood pressure The low pressure measured. 

User ID

Current Time 

Time and date (year/month/day; hour:minute)

Memory display

Indicate it is in the memory mode and which group of memory it is.

 

The bluetooth transfer icon blinks when the bluetooth is working.

Bluetooth transfer icon

Blood pressure level

Indicates the blood pressure level.

appears when the monitor is operated by User 1.
appears when the monitor is operated by User 2.
appears when the monitor is operated by guest User “G”.

NOTE:  User 1 and User 2, each with 60 memory spaces;

User G, no momery space.

mmHg
KPa

Measurement Unit of the blood pressure. 

(1 kPa=7.5 mmHg)

Measurement Unit of the blood pressure. (1 mmHg = 0.133 kPa)

Pulse/minute

Measurement Unit of Heart Rate.

Low ba�ery

Ba�eries are low and need to be replaced

Defla�on symbol

The cuff is defla�ng.

INTRODUCTION

INTRODUCTION

6

7

Summary of Contents for TMB-1491-BHJ



















Reviews: