In order to get the best effect and protect your monitor, please use the right
ba�eries and special power adapter which complies with local safety standard.
•
Open the ba�ery cover.
•
Install the ba�eries by matching
the correct polarity, as shown.
•
Replace the ba�ery cover.
Installing and Replacing the Batteries
CAUTION
CAUTION
Replace the ba�eries whenever the below happen.
The display is dim.
The display does not light up.
The Choice of Power Supply
1. Ba�ery powered mode:
6V DC 4× AAA ba�eries
2.
AC adapter powered mode:
(Please only use the recommended AC
adapter)
Please unplug the adapter to depart from
the using u�lity power, when you finish the
measurement.
6V 1A
Do not use new and used ba�eries together.
Do not use different types of ba�eries together.
Do not dispose the ba�eries in fire. Ba�eries may explode or leak.
Remove ba�eries if the device is not likely to be used for some �me.
Worn ba�eries are harmful to the environment. Do not dispose with dailygarbage.
Remove the old ba�eries from the device following your local recycling guidelines.
Monitor Components
List
1. Blood Pressure Monitor
(TMB-1491-BHJ)
4. AC Adapter
5. User manual
2. Cuff (Type BF applied part)
22 cm ~ 32 cm
22 cm ~ 42 cm
3. 4× AAA ba�eries
when shows.
Component list of
pressure measuring system
1 Cuff
2 Air pipe
3 PCBA
4 Pump
5 Valve
BLJ06L060100P-U
BATTERY COMPARTMENT
CUFF
AIR HOSE
AIR CONNECTOR PLUG
LCD DISPLAY
MEM BUTTON
START/STOP BUTTON
SET BUTTON
DC POWER SOCKET
AC adaptor
BEFORE YOU START
INTRODUCTION
8
9
