1.
Description
IP8100C is a small IP-PBX system; it can register up to 197 IP-Extension with two
IP-Trunks and one PSTN trunk. Easy to deploy and cost effective solution for
community intercom, home environments or small office application.
1.
RESET: Reset button
2.
STOP: Shutdown button. Pressing 2 seconds for safely power down.
3.
RS232: RS232 port
4.
Normal/Default: Normal Operation / Clear Flash Memory
5.
WAN1: to set IP address on mode 15 (LAN1 10.10.10.xxx)
6.
WAN2: to set IP address on mode 15 (LAN2 192.10.1.xxx)
7.
+5CVD IN: Power for IP8100
8.
FXO: FXO port
9.
GPO1~GPO4: Dry connector for Relay1 ~ Relay4 (Normally Open
30VDC/1A) and refer setting on mode 06.
10.
GPI1~GPI8: Sensors detection and refer setting on mode 06. GND with
GPI1~GPI8 are sensor connectors.
Summary of Contents for IP8100C
Page 8: ...6 www transtel co...