Page
108
TITLE DESCRIPTION:
ST = Station No.
11 to 6999, D = DISA
TK = Trunk No.
01 to 12,
S = Status
# = Hold, * = Answered the hold, X = Cut off by toll restrictions.
Telephone Number
First 24 digits
Account
8 digits in total of Forced Account Code
MM/DD
Month/Day
Begin_Time hh:mm
The start time of accessing the trunk line.
Duration_Tm hh:mm:ss
Time duration of the call.
Ring_Tm mm:ss
Incoming ring time.
Unit 00000
Meter Pulse Count
CASE EXPLANATION:
CASE
1
October 2, 08:35 A.M., Station 112 made a call (telephone No. is 00116495256611) through
line 1. The call lasted 2 minutes and 35 seconds, Account code No. 12345678 was entered
for the call and 12-meter pulses were recorded.
2
October 2, 08:45 A.M., An incoming call on line 2, rang for 10 seconds, station 115 answered
the call and stored an Account No. 87654321.
3
October 2, 12:00 P.M., An incoming call through line 3, rang for 35 seconds, no one answered
and the call was abandoned.
4
October 2, 12:10 P.M., Station 112 made a Long Distance call through line 4 by Forced
Account Code 1 and 23 meter pulses were recorded.
5
October 2, 12:30 P.M., Station 112 made a call by Forced Account Code but was denied
because of a wrong code.
6
October 2, 12:35 P.M., Station 116 made a call, which was restricted.
7
Line 1 was used by station 121 for 55 seconds then put on hold. One meter pulse was
recorded against this station for its section of the call
8
The held line 1 was answered by station 117 and he occupied the line for 3 minutes and 10
seconds. Four meter pulses were recorded against this station for its section of the call.
9
Incoming Line 3, using the DISA function, made an outside call 018220212 on line 5. The
Duration time is for line 5. 3 meter pulses were recorded for this call.
10
DISA is completed. The Duration time is for line 3.
11
Incoming call on an ISDN system. The number displayed is the In dial number dialled by the
calling party. The system can be programmed on a station by station basis to select whether
calls to that station will display the In dial number dialled or the CLI information of the
incoming caller
12
An incoming call rang for 35 seconds and no one answered. The CLI number of the calling
station is displayed.
13
An incoming call on line 5 (ISDN) was answered by station 111. The SMDR displayed the CLI
number (294150100) of the calling party and the extension number (112) of the calling party.
The extension number shown is what the system will receive if the call is from another
Transtel with
ISDN
. The format may be different or non-existent from other telephone
systems or on PSTN lines. The system can be programmed on a station by station basis to
select whether calls to that station will display the In dial number dialled or the CLI information
of the incoming caller. The number 94150100 is the pilot number of the In dial group.
14
An incoming call rang for 27 seconds and no one answered. The In dial number the calling
station dialled is displayed.
Summary of Contents for Lynx DK6 Series
