Page
140
Program 47-stn-IP : Hot Line Assignment
47-stn HOT LINE
000
St = Station No. (2-4 digits)
Data. ( Extension Mode )
47-stn HOT LINE
SPD:000
St= Station No. (2-4 digits)
Data. ( Speed Dial Mode )
General:
This feature allows a user to lift the handset and directly call a specific outside party through System
Speed Dial or an Intercom Extension without dialling any digits.
* Pressing
[SPK]
on a Keyphone allows the Hot line to be override.
Description:
1. Enter a System Speed Dial Number for an outgoing call or a Station Number for an Intercom call.
Example:
47-
115
HOT LINE
SPD:101
115
= Station No. ( 3 digits )
Speed Dial 101 (for example: 94150100)
When the user lifts the handset, the System will automatically call 9425010 through System Speed Dial
101.
2. Press
{MIC}
to select a hot line Intercom. (Press again to go back to SPD assignment), the display
shows:
47-115 HOT LINE
00
Enter an Extension number
118
47-115 HOT LINE
118
The system calls Extension
118
when the handset is
lifted.
The Hot Line is the recommended method of connecting a Fax machine to the system. Use a spare
analog port and make the Fax extension a Hot Line to an unused Speed Dial number and allocate the fax
line to be used by that Speed Dial. Do not program any number into the Speed Dial. When the fax goes off
line it will select the Fax line and then wait for the Fax to dial the number required.
Summary of Contents for Lynx DK6 Series
