background image

Page 15 

 

 

 
A version of Form 02 exists for each CO line in the system.  
 

Form 35 – CO Line – 07 - Day Ring Type 
Form 35 – CO Line – 08 - Night Ring Type 

 
Incoming Ringing Type  should be set to type 3 (Hunt) for all incoming 
trunks that are to be answered by voice mail.  This setting provides opti-
mum control of incoming ringing.  When set to 3, the first available voice 
mail port receives incoming ring signal.  If the first port is busy, the system 
will automatically step to the second port.  Should the first port not answer 
for any reason, the second port will be added on after the expiration of the 
timer set on Form 05-08-01.  Using this ringing sequence calls can be an-
swered in a timely manner by the voice mail without tying up more than one 
voice mail port per call. 
 
There is a version of Form 35 for each CO line installed in your system.   

 

 

Delayed Answer Programming Parameters 

 

Form 01 – CO Line – xx - Day Ringing Assignment 

Program the stations you want to ring before TMS is to answer the call 
during Day Service operation.  This can be from 1 station to 16 stations.  
 
A version of Form 01 exists for each CO line installed in your system. 
 

Form 02 – CO Line – xx - Night Ringing Assignment 

Program the stations you want to ring before TMS is to answer the call 
during Night Service operation.  This can be from 1 station to 16 stations.  
 
A version of Form 02 exists for each CO line installed in your system. 
 

Form 29 - CO Line – 07 CO Delayed Ring Timer to Hunt Group 

This parameter determines the time after which calls will overflow to Voice 
Mail.  When Common Audible, Linear or Circular Ringing is selected in 
Form 35-CO-07 or 35-CO-08, this timer will commence as soon as ringing 
is detected.  If the call is not answered before expiration of this timer, the 
call will be forwarded to the Hunt Group defined for this trunk in Form 29-
CO-08. 
 
 If incoming ringing type is set to Add-On Hunting  
(Form 35-CO-07 = 3 or 35-CO-08 = 3) then the timer will not commence 
until the last available station programmed on Form 01 is ringing.  This 
gives a somewhat elastic timer since, it will depend upon how many 
phones are programmed to ring in Form 01 (Day Service) or Form 02 
(Night Service) and how many are available (on-hook). 
 
 

Summary of Contents for TMS-Lite





















Reviews: