2- Installing your wine cabinet
When unpacking your cabinet, make sure that there are no traces of impact or
other damage and that there are no surface defects.
Carefully remove all of the protections and adhesive strips from the packaging
around your wine cabinet.
Move your cabinet to its final location.
The place you have selected for your cabinet should:
1 - Be ventilated
2 - Enable air to pass between the wall and the back of the cabinet
3 - Be well away from any heat source
4 - Not be too damp (laundry, pantry, bathroom, etc.)
5 - Have a solid and flat floor
6 - Have a standard and accessible electricity supply (standard socket to
country standards, linked to ground).
Child safety
This appliance is not intended to be used by persons (including children) with
reduced mental, sensory or physical abilities, or by persons with no knowledge
or experience, except where they are supervised or given prior instructions
regarding the use of the appliance by somebody responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
In order for you to level off your cabinet as easily as possible, it is
equipped with 4 adjustable feet. However, we do recommend that you
tighten the back feet to the maximum and use the front feet to create a
level (a spirit level is recommended for this operation).
WAIT 48 HOURS BEFORE PLUGGING IN THE CABINET
Should you need to move your cabinet, never tilt it more than 45° and always
sideways, on the side that the electrical cable comes out.
4
-
Power supply
Any work carried out on the cooling unit must be done by a refrigerationist,
who must check the circuit for leaks before switching the appliance back on.
Likewise, any work carried out on the electrical circuit must be done by a
qualified electrician.
