To adjust the temperatur e of your cabinet:
•
Press button SET 1 or SET 2, the symbol
appears.
•
Press the Probe button to make the previous setting appear.
•
Set the desired temperature using the SET 1 and SET 2 buttons.
•
Confirm your programming by pressing the Probe button.
The recommended control range for maturing your wine is from 42°F
to 64°F, the default setting is 54°F.
To operate correctly, your cabinet should be located in a room
with a temperature between 32°F and 95°F. A setting between 6°C and 9°C
is not recommended when the ambient temperature exceeds 25°C.
When there has been a significant modification in set temperatures, it can
take several hours for your wine cabinet to stabilise and display the desired
temperature.
6- Loading and layout advice
Layout
All shelves can be used in storage or sliding layout, with the exception of
the bottle rest shelf (see below)
•
Wooden locking pins in front holes: storage position
•
Wooden locking pins in rear holes: sliding position.
All shelves can be used as storage, sliding or presentation shelves. The
shelves in your cabinet have recesses*, so that you can store your bottles in
complete safety.
Configuration of a shelf in storage layout:
To install bottles on a storage shelf, carry out the following:
- Insert the shelf in the desired place.
- Place a wooden locking pin in each of the 2 holes located on the right
and left of the upper face, approximately 15 cm to the front of the
shelf: these pins secure the shelf to the thermoformed wall and
prevent any inappropriate movement (see diagram).
- Start by placing the bottles in each recess on the back row, with the
base of the bottle towards the back.
- Continue with the front row, placing the bottles in the opposite
direction.
Configurations
