TransWorld Antennas
TW8080
TM
10
TW8080
TM
Instruction Manual
Finally, fold the arms of the top and bottom sections out as shown in step 3. The
arms should be folded out completely horizontal. Firmly tighten all four clamp
knobs to ensure that the top arms do not rotate downward over time.
4) Install antenna onto the stand. As shown at
right, slide the bottom of the bottom section onto
the Permanent Mounting Assembly’s insulator
rod. As with assembly above, the slots on the
end of the bottom section should fully engage with
the mounting assembly’s clamp knob stud. Firmly
tighten the clamp knob.
