212121
This document is intended for Public Distribution
19473 Fraser Way,
Pitt Meadows, B.C. Canada V3Y 2V4
Chapter 3: Configuration
3-21
TR-Multi Series
Tranzeo Wireless Technologies
Port Filtering
This feature allows the radio to block requests to and from devices behind the
router. A list of the devices filtered appears at the bottom of the window.
Enable Port Filtering:
Click to apply the rules enabled from the Filter list.
WAN / LAN:
Select the network.
Filter Rule ID:
Enter the filter rule ID here to retrieve its information.
Allow / Deny:
The rule can either allow or deny ports.
Destination IP Range:
Enter the range of IP addresses on the WAN side
where the rule would apply.
Source Port Range:
Enter the range of ports on the LAN side where the
rule would apply.
Destination Port
Range:
Enter the range of ports on the WAN side where the
rule would apply.
ICMP Type:
This allows you to block certain types of ICMP as a
prevention against port scanning and some viruses.
Protocol:
Select the protocol used for this rule.
Update:
Click to apply changes after editing or deleting a filter.
Source IP Range:
Enter the range of IP addresses on the LAN side where
the rule would apply.
New:
Click to create a new filter. Fields will be cleared and
you may enter the information for the new filter.
Add:
After creating a filter, click this button to include the
new filter in the Filter list.
Edit / Delete:
Click to modify or eliminate the selected filter.
