ENGLISH
64
www.trapp.com.br
3 - Personal safety
Most accidents occur while the operator is
using the machine or during maintenance,
and are caused by lack of attention with basic
safety precautions. It is, therefore, important
to be aware of the potential risks of an action,
paying attention to their effects.
Take precautions against accidental
running.
Make sure the switch is set to “
off
”
before plugging the equipment in. Failure to
do so may cause a major accident.
Never leave the motor running indoors or
without ventilation. Exhaust gas contains
carbon monoxide, an odorless and deadly
gas.
Beware with what is going on and use
common sense when operating the
equipment.
Do not use it when you are tired,
distracted or under the influence of drugs,
alcohol or medicine. A slight distraction may
result in a severe injury.
Wear protection equipment. Always wear
goggles.
Wearing protection equipment like
gloves, shoes, and ear plugs increases your
protection and reduces the risk of an accident.
Wear proper clothes.
Wear neither loose
clothes nor jewelry as they can accidentally
get caught by the movable parts. If you have
long hair, tie it safely.
Remove all objects before turning on the
equipment.
A tool or any other object stuck
in the movable parts of the equipment may
result in an injury.
4 - Use and care
Do not use the equipment if the switch
does not turn on/off.
The equipment can not
be controlled if the on/off switch is damaged.
A defective switch shall be immediately
repaired.
Switch off the circuit breaker, remove the
fuses or unplug the equipment before
servicing, replacing the cutting blades
and accessories.
These safety preventive
measures reduce the risk of accidental
operation of the equipment.
Do not overuse the equipment.
Use it in
the right way and for the purposes described
in this manual for better performance and
safety while working.
Do not allow people that are not
familiarized with the equipment to use
it.
The equipment may become dangerous
in the hands of people not familiar with its
operation.
Preserve your equipment. Frequently
check if the movable parts are secured,
if any component is damaged or check
for any other condition that may affect
optimum operation.
Shall any problem
arise, fix it before using the equipment.
Many accidents are caused by lack of proper
maintenance.
Keep the cutting blade sharp and clean.
Use the equipment and accessories
according to the instructions in this
manual. Take in consideration the
working conditions and the service to be
done.
Using the equipment for operations
other than those in this manual may result in
dangerous situations and risk of accident.
Do not shred stones, glass, metals, plastic,
packages of chemical products (perfumes,
cleaning products, paint, etc.) or other
materials that may damage the shredder.
Never store the equipment with fuel in
the tank. And if necessary keep the motor
operating until shutdown due to lack of
fuel.
Note:
Do not use the fuel injector when the
motor is already warm (TR-600G).
Attention!
The cutting blade keeps moving after the
equipment is switched off. Be aware of that
when servicing.
