ENGLISH
36
www.trapp.com.br
2 - Electrical safety (TRC-40)
Do not expose the equipment to either rain or
humidity.
Install the equipment in a dry place,
protected from weather conditions. Water inside
the equipment can damage the electric circuit of
the motor, besides increasing the risk of an
electric shock.
Before installing your equipament, make sure
the electrical voltage in your property coincide
with the electric motor.
Connecting electrical
cables in a different voltage will cause immediate
motor burnout resulting in a loss of warranty.
For your safety, ground the equipment. Failure to
do so may result in an accident, electrical
shock or personal injury.
3 - Personal safety
Beware with what is going on and use common
sense when operating the equipment.
Do not use
it when you are tired, distracted or under the
influence of drugs, alcohol or medicine. A slight
distraction may result in a serious injury.
Do not leave shredder running and/or
unattended.
Do not turn on shredder if feeding funel is open.
In this position the blades will lock.
Wear protection equipment.
Always wear
goggles.
Wearing protection equipment like
gloves, shoes, and ear plugs increases your
protection and reduces the risk of an accident.
Wear proper clothes. Wear neither loose
clothes nor jewelry.
Do not be overconfident.
Keep your feet on the
ground to maintain balance while you are
carrying or using the crusher
.
Take precautions against accidental running.
Make sure the switch is set to “off” before
plugging the equipment in. Failure to do so may
cause a serious accident (TRC-40).
Remove all objects before turning on the
equipment.
A tool or any other object stuck in
the movable parts of the equipment may result
in an injury.
4 - Use and care
Do not overuse the equipment.
Use it in the
right way and for the purposes described in
this manual for better performance and safety
while working.
Do not grind rock, glass, metals, plastics, chemical
products or other items that can damage the
shredder mill.
Do not allow people that are not familiarized
with the equipment to use it.
The equipment
may become dangerous in the hands of people
not familiar with its operation.
Should the shredder not achieve its full power
capacity,
contact service dealer or an electrician
to verify the condition of your electric power
source to avoid motor burn-out by overload
.
If the engine does not start (locked) when the
crusher is turned on, turn it off immediately,
unlatch the cutting assembly, and then try to
switch it on again.
Verify that the blades are running clockwise.
Should blades be running counterclockwise,
contact service dealer or an electrician to invert
direction of rotation (TRC-40).
Do not use the equipment if the switch does not
turn on/off. The equipment can not be
controlled if the on/off switch is damaged. A
defective switch shall be immediately repaired
(TRC-40).
Disconnect the circuit breaker, remove the
mains plug or the gasoline engine spark plug
cable before making any adjustments or
changing blades
, this will prevent future
accidents.
Never put the equipment away with gasoline in
the tank (TRC-50).
If necessary, keep the engine
running until it turns off due to lack of gasoline.
Repairs should be made by authorized TRAPP
technicians only.
Preserve your equipment. Frequently check if
any component is damaged or check for any
other condition that may affect its optimum
operation.
Shall any problem arise, fix it before
using the equipment.
Many accidents are caused
by lack of proper maintenance.
