ENGLISH
38
www.trapp.com.br
Feeding Funnel Assembly
4
3
6
7
1
2
5
Image merely illustrative
Attach the feeding funnel (1) in the body (2), pass
the locking pin (3) through the holes of the feeding
funnel (1) and the body (2).
Fix the locking pin (3) with the cotter pin (4).
Then lock the feed hopper (1) using the plain washer
(5), the pressure washer (6) and the hand screw (7) in
each of the 3 holes to fasten the hopper to the body.
Note:
To avoid physical damage to the
equipment, never turn the equipment on if the
feed hopper is without the locking pin and the 3
hand screws.
TRC-40
Feeding
funnel
Image merely illustrative
TRC-50
Image merely illustrative
By means of the feeding funnel tilt the shredder to the right height for the operator (TRC-40).
Using the transport handle or the feed hopper handle, lift the crusher up to a maximum of 30 degrees (TRC-50).
Move the shredder to the point required and start the work.
Moving the Coconut Crusher