ENGLISH
73
www.trapp.com.br
Distance check between knives
Every time the blades are removed (disassembly
/ reassembly) before starting the machine again,
check and adjust the distance between the knife
and the counter cutting;
The adjustment should be done with the distance
between knives as the machine:
TRR 180/190 e 280 = 3 mm +/- 0.4 mm
TRR 250/260 = 2.5 mm +/- 0.4 mm
TRR 180/190 =
3 mm +/- 0,4 mm
TRR 250/260 =
2,5 mm +/- 0,4 mm
TRR 280 =
3 mm +/- 0,4 mm
Counter
blade
Blade
Gasoline engine
To change motor oil
Establish the temperature range foreseen before
next change of oil. The heated oil makes it facilitates
its flow during the change.
Equipment must be on a flat and level surface.
Collect used oil in proper container.
As shown in Figure 10, carefully unscrew the oil
drain plug (1) to avoid possible accidents, such as
burns.
1
2
1
Image
merely illustrative
Figure 10
Attention!
If motor is hot when changing oil, be
careful to remove oil container. Hot oil
is released with more pressure, and may
cause burns.
When oil has been fully drained, screw back oil
container (1).
As shown in Figure 11, remove the dipstick (2) and
fill the crankcase with the oil. When completed,
close it again, according to the amount indicated in
the engine manual.
1
2
Image
merely illustrative
Figure 11
Summary of Contents for TRR 180
Page 78: ...Notas Notas Notes ...
Page 79: ......
