background image

Project

Quantity

Item #

Model Specified:

CSI Section 11400

TRAULSEN
4401 BLUE MOUND RD.

FT. WORTH, TX 76106

PHONE 1 (800) 825-8220

FAX-MKTG. 1 (817) 624-4302

Website: www.traulsen.com

SECTION

1-10

DIMENSIONAL DATA

R/ALT126WUT

R/ALT226WUT

Net capacity cu. ft.

19.1 (541 cu l)

40.8 (1156 cu l)

Length - overall in.

29

7

8

 (75.9 cm)

58 (147.3 cm)

Depth - overall in.

29 (73.6 cm)

29 (73.6 cm)

Depth - less handle in.

27

3

(69.4 cm)

27

3

(69.4 cm)

Depth - over body in.

26 (66.0 cm)

26 (66.0 cm)

Depth - door open 90

°

 in.

51

11

16

 (131.3 cm) 51

11

16

 (131.3 cm)

Clear door width in.

21

1

2

 (54.6 cm)

21

1

2

 (54.6 cm)

Clear half-door height in.

27

1

2

 (69.9 cm)

27

1

2

 (69.9 cm)

Clear full-door height in.

57

5

8

 (146.3 cm)

57

5

8

 (146.3 cm)

Height - overall on 6

"

 legs

83

1

4

 (211.5 cm)

83

1

4

 (211.5 cm)

RLT Net Wt. lbs.

375 (170 kg)

655 (297 kg)

ALT Net Wt. lbs.

335 (152 kg)

585 (265 kg)

No. Standard Shelves

3

6

Shelf area sq. ft.

1

14.6 (1.35 sq m) 29.2 (2.71 sq m)

ELECTRICAL DATA

Voltage

115/60/1

115/60/1

Feed wires with Ground

3

3

Full load amperes

11.5

14.9

REFRIGERATION DATA

Refrigerant

R-404A

R-404A

BTU/HR H.P.

2

1890 (

1

2

 HP)

3070 (

3

4

 HP)

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.

Continued product development may necessitate specification changes without notice.
Part No. TR35764 (revised 1/07)

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, louver assembly and doors are constructed
of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are
constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet
top, back and bottom are constructed of heavy gauge aluminized steel. A set of four
(4) adjustable 6

"

 high stainless steel legs are included.

Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide
hinges with stay open feature at 120 degrees. Hinges include a concealed switch to
automatically activate the interior incandescent lighting. Guaranteed for life, work
flow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways.  Doors have seamless, polished metal
corners.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Both the cabinet and door(s) are insulated with an average of 2

"

 thick high density,

non-CFC, foamed in place polyurethane.

Refrigeration System

A top mounted, self-contained, balanced refrigeration system using R-404A
refrigerant is conveniently located behind the one piece louver assembly.  It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled
hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil
located outside the food zone and a top mounted non-electric condensate
evaporator.  Biased return air duct protects against introduction of warm kitchen air,
promoting even temperature maintenance and efficient operation.  A 9

'

  cord and

plug is provided.  Standard operating temperature is 0 to -5

°

F.

Controller

The easy to use water resistant  INTELA-TRAUL

®

 microprocessor control system is

supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant.  Third party software required for
network connection.  It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, Defrost Lockouts, and an RS485 data port.
In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open,
Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power
Supply Interruption.

Interior

Standard interior arrangements include three (3) chrome plated wire shelves per
section, mounted on shelf pins. Shelves are full-width, and do not have any large
gaps between them requiring the use of 

"

bridge

"

 or 

"

junior shelves.

"

  Recommended

load limit per shelf should not exceed 225 lbs. Both standard and optional
interior arrangements are completely installed at the factory.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard.  An optional 2

nd

 year extended parts

and labor warranty is also available. In addition the INTELA-TRAUL

®

  control is

warranted by a two year parts and labor warranty.

Specifications

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1=

Area of standard shelf compliment only, does not include storage area of additional shelves or available

on cabinet bottom.

2=

Based on a 90 degree F ambient and -20 degree F evaporator.

3=

For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information

on remote models, please refer to spec sheet 12-2.

Plan - R/ALT126WUT

Elevation - R/ALT126WUT

Section - All Models

Plan - R/ALT226WUT

Elevation - R/ALT226WUT

NOTE: Full load amps and plug style may vary depending
on electrical options chosen and condensing unit employed.

One Section Models Equipped

With One NEMA 5-15P Plug

Two Section Models Equipped

With One NEMA 5-20P Plug

Reviews: