After Sales Support TEL: 1800 623 432 · WEB: www.traveler-service.com/au
17
Power frequency:
Set the mains frequency to the mains frequency of your local power supply grid either
to 50 or 60 Hz. This prevents flickering when using the camcorder under artificial light
conditions.
Power Save:
1min
The camcorder switches off if no button has been pressed for 1 minute.
3min
The camcorder switches off if no button has been pressed for 3 minutes.
5min
The camcorder switches off if no button has been pressed for 5 minutes.
OFF
Automatic switch-off is deactivated.
Panel Protect:
30s
The display switches off if no button has been pressed for 30 seconds.
1min
The display switches off if no button has been pressed for 1 minute.
2min
The display switches off if no button has been pressed for 2 minutes.
OFF
The display remains permanently switched on.
Date & Time:
Set the date and time by selecting the value to be changed with the
MODE
button
and change value using the
UP
and
DOWN
buttons. Confirm settings by pressing the
OK
button.
Language:
Select the desired menu language by pressing the
UP
and
DOWN
button and confirm
your selection by pressing the
OK
button.
TV Out:
NTSC
For playing back recordings on a NTSC standard TV.
PAL
For playing back recordings on a PAL standard TV.
