564 HO DancingFyre Burner
Installation Instructions
(sku: 96900114)
Page 10 of 11
17601661 — 9/22/11
© Travis Industries, Inc.
Center Twig Placement
8. Place the center twig directly on the burner as shown below. Make sure it does not cover any burner holes.
Rock Wool Installation
9. Place the included rock wool on top of the burner to enhance the glow from the burner.
NOTE: The rock wool works best when it is applied in a very thin, porous layer.
The best method for
applying the rock wool is to brush it on to the burner. Compress a clump of rock wool between your thumb
and forefinger. Use a stiff brush to apply a thin layer of rock wool fibers onto the burner. Do not use the
entire bag of rock wool. Use only a small amount and save the remainder. Over-use of rock wool will
diminish the glow and may cause sooting or other adverse conditions.
