Xtreme 6020 Driftwood Log Set
(sku 94700882)
Page 5 of 5
17601613 - Printed 5/13/10
© Travis Industries, Inc.
8. The right twig is placed under the front right log as shown below.
9. Position the center twig as shown below. When in place, the twig will insert under the front left log and
line up with the right twig.
10. Replace the glass frame and start the fireplace. Let the fireplace burn for 30 minutes on high and check
the logs for sooting. Remove the glass and carefully inspect the areas above the burner for soot
accumulation. If any soot is detected, re-adjust the log and repeat this step to insure no sooting occurs.
