GS2 Basic Wall Mount Remote Operation
SKU# 99300695
Page 15 of 18
17602250 - 10/7/22
Travis Industries, Inc.
Manual On-Off / Standard Thermostat
Use the thermostat button to cycle through the two thermostat settings (see below).
MANUAL ON/OFF
– The burner will turn on and off using the remote (see below). Press the On/Off
button to control the burner. When off, the display will only show the current temperature.
THERMOSTAT
- While in standard thermostat setting, the transmitter will turn the burner on and off to
achieve the target temperature (see below). To adjust the target temperature, press the up and down
buttons until a suitable temperature is achieved.
NOTE:
If the transmitter batteries go dead while in thermostat setting, the appliance will shut off after
approximately 24 hours.
ON
F
OFF
ON
SMART
Look here for the
thermostat setting.
Press the thermostat button to cycle
through the thermostat settings.
F
OFF
When in manual setting, the
word "OFF" will appear here.
F
ON
When in standard thermostat
setting, the word "ON" will
appear here.
This is the target
temperature on the
read-out. Use the up or
down buttons to adjust
the target temperature.
