GS2/MV Basic Wall Mount Remote Installation
with AC Adapter
SKU# 99300696
Page 3 of 18
17602250 - 10/7/22
Travis Industries, Inc.
Overview
This kit supplies a basic wall-mount remote kit with an AC adapter to power the remote receiver. The basic
installation is the same for MV and GSB stoves and inserts. This kit can also be used with MV and GSB
fireplaces however, the way the kit connects to AC power is slightly different than with the inserts and stoves (see
fireplace installation section for details).
General Fireplace, Insert, and Radiant Stove Installation Instructions
This set of installation instructions shows a summary of the remote installation.
For detailed instructions on the placement of the receiver and other details, refer to the installation
manual included with your appliance.
RADIANT INSERT NOTE:
If a blower is used you will not
use the strain-relief bracket that is included with this kit and
can skip step one. When a blower is used, the ground for the
remote AC adapter will connect to the blower rheostat
housing and the blower ground wire will be attached to the
extra tab on the AC adapter grounding quick connect.
