Operation
25
© Travis Industries
4130924
100-01330_004
TSTAT (Thermostat) Mode
TSTAT mode allows you to use a thermostat to control room temperature. The stove automatically
turns on when the temperature drops below the thermostat setting and turns off (or to low) once the
thermostat setting is met.
Wireless thermostats are available from Travis Industries. See your dealer for details.
To Start the Stove in TSTAT Mode
Press the TSTAT button on the
control panel. If there is a call for
heat from the thermostat, the
stove will enter the start-up
sequence for approximately 22
minutes.
To Adjust the Heat Output
Use the HEAT knob on the control panel to adjust the heat output.
NOTE:
Depending upon which TSTAT Program you are in (1, 2, or 3), the heat output may vary once the
target temperature is reached. For details see “Changing the TSTAT Program” on the following page.
TIP:
If you find that the stove turns on and off repeatedly, you may wish to turn the heat output to a lower
setting, which will provide a more consistent heat output over time, and eliminate the need for the
thermostat to repeatedly turn the stove off.
To Shut Down
Press the STOP button on
the control panel. The stove
will begin the shut-down
process, which takes about
approximately 45 minutes.
TSTAT
STOP
HEAT
FAN
AUTO FAN
LOW
HIGH
www.travisproducts.com
GLASS AND SURFACES OF UNIT
CAN GET HOT ENOUGH
TO CAUSE SEVERE BURNS.
KEEP CHILDREN AND PETS AWAY.
WARNING
START
LOW
HIGH
TSTAT
STOP
HEAT
FAN
AUTO FAN
LOW
HIGH
www.travisproducts.com
GLASS AND SURFACES OF UNIT
CAN GET HOT ENOUGH
TO CAUSE SEVERE BURNS.
KEEP CHILDREN AND PETS AWAY.
WARNING
START
LOW
HIGH
