Maintenance
35
© Travis Industries, Inc.
4/11/22 - 1538
Outdoor Linear Burners
Accessing Pilot and Electrical Components
Use a 1/4” nut driver or
screw gun to remove the
(4) screws that secure the
pilot support bracket to the
tray.
Carefully lift the pilot
assembly (take care not to
damage the wires
attaching the pilot to the
control module below.
When you have removed
all the slack from the
wires, reach down into the
electrical box with your
other hand and free the
control module from the
Velcro that secures it to
the side of the electrical
box. You can now lift the
pilot and electrical
components out of the tray
to perform service or
testing.
Once maintenance or testing of components is complete, follow the above steps in reverse to return
the appliance to its proper configuration.
