12
Setup Manual - Lighting Control Engine
Initial start up
Connect your devices to the server and connect with the line power supply.
Once the line power supply is connected, the LCE switches on automatically.
The front LED indicators light up in green. Red blinking of the LEDs indicates
hard drive activity. You can now see on the touch-screen that the server has
started.
For normal switching on of power, press the On switch on the left side of the
LCE. Only switch off power to the LCE by shutting down the operating system.
Disconnecting the operating voltage can lead a loss of data. If the operating
system does not respond, press the Off switch on the LCE and keep pressed
until the LCE switches itself off.
i
Change the Windows administrator password within six weeks after
first startup. Otherwise the password will expire and cannot be reset
anymore!
System Configuration
All steps shown here relate to the English version of Microsoft® Windows 7™. If
you have a different language version, it is possible that expressions change.
The default language of the operating system is English.