TR A X X AS
•
13
The following Traxxas High
Current Connector packages
are available from your hobby
dealer. When using adapters, be
careful not to exceed the current
rating of the Molex connector.
Part #3060
Single Male/Female
Part #3080
2-Pack Female
Part #3070
2-Pack Male
Part #3061
Male Charge Adapter
Part #3062
Female Charge Adapter
The Traxxas High Current Connector
Your model is equipped with the patented
Traxxas High-Current Connector. Standard
connectors restrict current flow and are not
capable of delivering the power needed to
maximize the output of the Velineon Brushless Power system.
The Traxxas connector’s gold-plated terminals with a large contact
surfaces ensure positive current flow with the least amount of
resistance. Secure, long-lasting, and easy to grip, the Traxxas
connector is engineered to extract all the power your battery has
to give.
Using LiPo Packs in Your Model
The VXL-3m is compatible with 2S and 3S LiPo packs, and is
equipped with Low-Voltage Detection circuitry to prevent over-
discharging. Make certain LiPo mode is selected (
see page 18 for
details
) when using LiPo packs in your model.
Using an Additional Battery for Increased Run Time
Traxxas 1/16 models only require one battery pack, but the chassis
can accept two batteries. Your model can be run with two battery
packs to extend run time. The batteries must be connected in
parallel, which will combine the capacity of the two batteries
(for example, two 7.2-volt 1000mAh packs connected in parallel
will deliver a total capacity of 2000mAh, but total voltage will
remain 7.2 volts). This is easily done with a parallel Y-harness (Part
#3064, sold separately). Be sure to only use the Y-harness with
identical battery packs; do not mix batteries of different chemistries
or capacities.
Using an Additional Battery For Increased Speed
An additional battery may also be used to increase the top speed
of your model, by connecting the batteries in series using a Traxxas
series connector (Part #3063, sold separately). This also requires
a gearing change using the supplied, optional pinion gear as
described on page 25.
Precautions
•
The High Speed dual-battery battery and gearing
configuration is for high-speed running on smooth
surfaces only. Avoid repetitive hard acceleration to prevent
overstressing the motor, speed control and batteries.
•
Failure to install the appropriate gearing can cause failure
of the motor, speed control and batteries when running the
model on 12 NiMH cells. See the gearing chart on page 24 for
more information about properly gearing your model.
•
Make certain both batteries are fully charged before
installing them in your model. Installing a fully charged pack
and a partially discharged pack may lead to overdischarging
and damage to the partially discharged battery.
•
Do not mix batteries of different brands, chemistries or
capacities. Only genuine Traxxas batteries are approved for
dual-battery use in this model.
•
Stop running your model and allow it to cool if the speed
control’s thermal overload protection activates or if the
motor temperature exceeds 200° F.
When operating your model with two batteries, be careful
to monitor the temperature of the speed control and motor
to prevent overheating. Stop running your model and allow
it to cool if the speed control’s thermal overload protection
activates or if the motor temperature exceeds 200° F.
For best off-road handling with two battery packs, consider
installing stiffer springs on your model. Traxxas offers
accessory springs for this purpose; see the parts list included
with your model for part numbers.
TRAXXAS TQ 2.4GHz RADIO & VELINEON POWER SYSTEM
To prevent loss of radio range
do not kink or cut the black wire,
do not bend or cut the metal tip,
and do not cut the white wire at
the end of the metal tip.
Correct
No
No
