background image

2 • 1/16 SUMMIT

3

 

BEFORE YOU 
PROCEED

4

 SAFETY 

PRECAUTIONS

5

 

TOOLS, SUPPLIES 
AND REQUIRED 
EQUIPMENT

6

 

ANATOMY OF  
THE MODEL

7

 

QUICK START: 
GETTING UP  
TO SPEED

8

 

THE TRAXXAS  
TQ RADIO SYSTEM

14

  ADJUSTING THE 

ELECTRONIC SPEED 
CONTROL

16

  DRIVING YOUR MODEL

19

 TUNING 

ADJUSTMENTS

23

 MAINTAINING 

 

YOUR MODEL

INTRODUCTION

Thank you for purchasing a Traxxas 1/16 scale model. Your new 
model combines proven Traxxas innovations including F1-
inspired, rocker-actuated suspension, waterproof electronics, 
and a monocoque-style chassis for outstanding handling and 
incredible speed and power. Your Traxxas model is designed for 
high-performance driving, with balanced weight distribution, 
lightweight and high-strength materials, and the precise 
engineering that is the hallmark of all Traxxas vehicles.
 
This manual contains the instructions you will need to operate and 
maintain your model so that you can enjoy it for years to come. 
We want you to feel confident that you own one of the best-
performing models in the market and that it is backed by a team 
of professionals who aim to provide the highest level of factory 
support possible. Traxxas models are about experiencing total 
performance and satisfaction, not just with your model, but also 
with the company that stands behind it. 

We know you’re excited about getting your new model on the 
road or trail, but it’s very important that you take some time to 
read through the Owner’s Manual. This manual contains all the 
necessary setup and operating procedures that allow you to unlock 
the performance and potential that Traxxas engineers designed 
into your model. 

Even if you are an experienced R/C enthusiast, 

it’s important to read and follow the procedures in this manual.

Thank you again for going with Traxxas. We work hard every day to 
assure you the highest level of customer satisfaction possible. We 
truly want you to enjoy your new model!

Traxxas Support

Traxxas support is with you every step of the 
way. Refer to the next page to find out how to 
contact us and what your support options are.

Quick Start

This manual is designed with a Quick 
Start path that outlines the necessary 
procedures to get your model up 
and running in the shortest time possible. If you are an 
experienced R/C enthusiast you will find it helpful and fast. 
Be sure and read through the rest of the manual to learn 
about important safety, maintenance, and adjustment 
procedures. Turn to page 7 to begin.  

REGISTERING YOUR MODEL

In order to serve you better as our customer, please  
register your product within 10 days of your purchase  
online at Traxxas.com/register.

T r a x x a s . c o m / r e g i s t e r

Summary of Contents for 1/16 Summit 7205

























Reviews: