18
F-3
Locate one of the ball differentials and (2) 10x15x4mm ball bearings.
The bearings are in Hardware Bag.
F-4
Press a 10x15x4mm ball bearing onto each side of the ball differential.
F-5
Find the 76-tooth drive belt. Wrap the 76-groove drive belt around the
differential pulley, and insert the Ball differential with bearings into the
front differential housing. Note the orientation of the ball differential. The
main drive pulley is offset to the left.
F-6
Fit the front differential housing cover onto the front differential housing
as shown.
F-2
Insert a 3x25mm Buttonhead machine screw through the ears on the
front differential housing cover. Secure each screw with a 3mm flange
nut.
Left