SLASH VXL • 25
Brushed Motors
For the ultimate in versatility, the VXL-3s has no motor limit when
used with a brushed motor. This allows you to use any readily
available 540 or 550 size brushed motors in your VXL-3s equipped
vehicle. Always be sure to follow all break-in and maintenance
instructions set forth by the motor manufacturer. The VXL-3s
automatically detects what kind of motor it is connected to so no
programming actions are required to use brushed motors. Simply be
sure to properly connect the motor to the speed control as shown.
Optional brushed motor wiring diagram
:
• Motor positive (+) should be connected to phase A (blue).
• Phase B is not used.
• Motor negative (-) should be connected to phase C (white).
If the wiring is reversed, the motor will operate in reverse. If the
motor is wired incorrectly (using phases A+B or B+C), the VXL-3s will
send short pulses to the motor and turn off the LED, indicating a fail-
safe mode. It will not return to normal operation until wired properly.
TEMPERATURES AND COOLING
Monitoring temperatures will extend the lives of the batteries and
motors. There are many options available that will help you monitor
temperatures and cool your components.
Temperature gauge
An on-board temperature gauge, such as the
Traxxas part #4091, can aid you in monitoring
your motor temperature. Generally, try to
keep your motor below 200° F. If necessary,
increase airflow to the motor by cutting out
the rear of the body or windshield.
Heat sink cooling fan
The VXL-3s is equipped with an additional
connector to supply power to an optional
heat sink cooling fan (Part #3340). The
optional heat sink cooling fan can assist in
cooling the VXL-3s in high-current motor
applications.
LIPO BATTERIES
LiPo batteries are intended only for the most advanced users that are
educated on the risks associated with LiPo battery use. It is critical to
follow all instructions supplied by the battery manufacturer and the
charger manufacturer for proper charging, use, and storage of LiPo
batteries. Make sure you understand how to use your LiPo batteries.
See Safety Precautions and warnings on page 3 for more information.
If you have questions or need technical assistance, call Traxxas at
1-888-TRAXXAS
(1-888-872-9927) (U.S. residents only)
Battery
Pinion/Spur
mAh
Skill Level
#5807
Slash VXL
Nominal Voltage
35+mph
23/86*
7-Cell NiMH
8.4V
3000+ mAh
40+mph
28
/86**
7-Cell NiMH
8.4V
3000+ mAh
Stock Gearing
Included Optional Pinion
Accessory Gearing
*
**
†
60+mph
60+mph
31/76
31/76
3S LiPo
11.1V
5000+ mAh
†
35+mph
23/86*
2S LiPo
7.4V
5000+ mAh
50+mph
50+mph
3S LiPo
11.1V
5000+ mAh
23/86
23/86*
ADJUSTING YOUR MODEL
