34
•
XO-1
TQ
i
ADVANCED TUNING GUIDE
Starting Over:
Restoring Factory Defaults
When programming your
2.4GHz transmitter, you may
feel the need to start over
with a clean slate. Follow
these simple steps to restore
the factory settings:
1. Turn transmitter off.
2. Hold both MENU and SET.
3. Turn transmitter on.
4. Release MENU and SET.
The transmitter LED will
blink red.
5. Press MENU once. The
transmitter LED will blink
red twice repeatedly.
6. Press SET to clear settings.
The LED will turn solid
green and the transmitter
is restored to default.
TRAXXAS LINK MODEL MEMORY
Traxxas Link Model Memory is an exclusive, patent-pending
feature of the TQi transmitter. Each time the transmitter is bound
to a new receiver, it saves that receiver in its memory along with
all the settings assigned to that receiver. When the transmitter and
any bound receiver are switched on, the transmitter automatically
recalls the settings for that receiver. There is no need to manually
select your vehicle from a list of model memory entries.
Model Lock
The Traxxas Link Model Memory feature can store up to thirty
models (receivers) in its memory. If you bind a thirty-first receiver,
Traxxas Link Model Memory will delete the “oldest” receiver from
its memory (in other words, the model you used the longest time
ago will be deleted). Activating Model Lock will lock the receiver in
memory so it cannot be deleted.
You may also bind multiple TQi transmitters to the same model
making it possible to pick up any transmitter and any previously
bound model in your collection and simply turn them on
and drive. With Traxxas Link Model Memory, there is no need
remember which transmitter goes with which model and there
is never a need to have to select any model from a list of model
memory entries. The transmitter and receiver do it all for you
automatically.
To activate Model Lock:
1. Switch on the transmitter and receiver you wish to lock.
2. Press and hold MENU. Release when the status LED blinks green.
3. Press MENU three times. The status LED will blink green four
times repeatedly.
4. Press SET. The status LED will blink green in single-flash
intervals.
5. Press SET once. The status LED will blink red once repeatedly.
6. Press MENU once, the LED will blink red twice repeatedly.
7. Press SET, the LED will blink rapidly green. The memory is now
locked. Press MENU and SET to return to driving mode.
Note
: To unlock a memory, press SET twice at step 5. The LED will
blink rapidly green to indicate the model is unlocked. To unlock
all models, press MENU twice at step 6 and then press SET.
To delete a model:
At some point, you may wish to delete a model you no-longer
drive from the memory.
1. Switch on the transmitter and receiver you wish to delete.
2. Press and hold MENU. Release when the status LED blinks green.
3. Press MENU three times. The status LED will blink green four
times repeatedly.
4. Press SET once. The status LED will blink green once repeatedly.
5. Press MENU once. The status LED will blink green twice
repeatedly.
6. Press SET. The memory is now selected to be deleted.
Press SET to delete the model. Press and hold MENU to
return to driving mode.
