Covers Parts #8990
LED Light Bar Kit Installation Instructions
TRAXXAS.com
Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
CAUTION! To prevent damage to the electronic speed control (ESC)
and/or the high-voltage power amplifier, ensure the battery is
disconnected before plugging the amplifier into the ESC.
High-Voltage Power Amplifier Installation (Fig. 5):
1. Use needle nose pliers to remove the accessory port cover from the ESC (Fig. 2).
2. Install the high-voltage power amplifier (A) on the truck chassis. Ensure that the
A, B, C, D connection ports on the amplifier face the speed control. Secure with the
included 3x12mm button-head screws (2). Refer to the
assembly diagram
(Fig. 5) and
wiring diagram
(Fig. 6).
3. Plug the 8-pin connector from the high-voltage power amplifier into the accessory port
on the ESC;
note orientation of the connector
(Fig. 3).
The amplifier and lights will turn
on when the ESC is powered on.
Front and Rear Bumpers/LED Light Bar Installation (Fig. 5):
Refer to the assembly diagram (Fig. 5) and wiring diagram (Fig. 6).
1. Remove the existing front and rear bumpers (B, C) from the chassis by removing the
4x12mm button-head cap screws (4). Retain and reuse the screws.
2. Install the new front bumper with LED light bar (D) using the 4x12mm button-head
cap screws (2) removed in step 1. Plug the
connector into the high-voltage power amplifier
port A (white) (Fig. 4).
3. Install the new rear bumper with LED light bar (E)
using the remaining 4x12mm button-head cap
screws (2).
4. Plug the connectors (red and blue) into the high-
voltage power amplifier ports (red connector
to C, blue connector to D) (Fig. 4).
5. Use the supplied zip ties to secure all wiring to
the chassis (Fig. 6).
Kit Contents:
• High-Voltage Power Amplifier
• 3x12mm button-head screws (2)
• Front bumper with LED light bar
• Rear bumper with LED light bar
• Zip ties (8)
Tools needed:
• 1.5mm hex wrench
• 2.0mm hex wrench
• 2.5mm hex wrench
• Needle nose pliers
Visitez Traxxas.com/manuals pour télécharger
les instructions dans votre langue.
Visite la página Traxxas.com/manuals para
descargar el instrucciones en su idioma.
Auf Traxxas.com/manuals, können Sie
anleitung in Ihrer Sprache downloaden.
Fig. 2
Fig. 3
High-Voltage Power Amplifier
Connection Ports
Front LED Light Bar (white)
Rear LED Light Bar (tail lights) (red)
Rear LED Light Bar (reverse lights) (blue)
A
B
C
D
Fig. 4
Accessory Port Cover
HKC19026-R00 Rev 190822
Compatible with the following Traxxas
electronic speed controls (sold separately):
Velineon® VXL-4s (part #3465), Velineon® VXL-6s (part #3485)
Velineon® VXL-8s (part #3496)
B
Assembly Diagram
4x12mm BCS
4x12mm BCS
3x12mm BCS
A
C
D
E
Fig. 5
4x12mm BCS
4x12mm BCS
Fig. 1
