background image

4 • 1/16 E-REVO VXL

This model is not intended 
for use by children under 
14 years of age without the 
supervision of a responsible 
and knowledgeable adult.

All instructions and 
precautions outlined in this 
manual should be strictly 
followed to ensure safe 
operation of your model.

Previous experience with 
radio  controlled  models 
is recommended. Models 
require  a  higher  level  of 
setup,  maintenance,  or 
support equipment.

Skill Level = Myriad Semi Bold

1 2 3 3+ 4 5

bluehighway font

For Expert Drivers

Choose the Model That is Right For You.

For individual Models

No previous experience with radio controlled models is required.

Models require a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. These 

models are capable of high speeds, requiring experienced driving control. 

Models require detailed setup, and/or maintenance procedures with required 

support equipment. 
Previous experience with radio controlled models is mandatory. 

These models are capable of very high speeds and require an even higher 

level of skilled driving control. Models require detailed setup, and/or mainte-

nance procedures with required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 

for expert drivers only. Experience with nitro-powered radio controlled 

models is required!

Previous experience with radio controlled models is recommended.

Models require a higher level of setup, maintenance, or support equipment. 

No previous experience with radio controlled models is required.

Model requires a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. This model is 

capable of high speeds, requiring experienced driving control. Model requires 

detailed setup, and/or maintenance procedures with required support 

equipment. 

Previous experience with radio controlled models is mandatory. This model is 

capable of very high speeds and requires an even higher level of skilled driving 

control. Model requires detailed setup, and/or maintenance procedures with 

required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 

for expert drivers only. Experience with nitro-powered radio controlled 

models is required!

 Previous experience with radio controlled models is recommended.

Model requires a higher level of setup, maintenance, or support equipment.

BELOW TEXT HAS BEEN UPDATED on 3-14-07
Kent wants maintenance text to be at the END of the paragraph.-- KB

1

• Do not charge batteries inside of an automobile. Do not charge batteries 

while driving in an automobile. The charger is equipped with a long cord 
intended to allow the battery to be charged outside of an automobile 
when using the automobile’s auxiliary power socket. If the cord will not 
reach outside of the automobile, find another power source.

• Never charge batteries on wood, cloth, carpet or on any other 

flammable material.

• Do not operate the charger in a cluttered space, or place objects on top 

of the charger or battery.

• If a battery gets hot to the touch during the charging process 

(temperature greater than 140°F / 60°C), disconnect the battery from the 
charger and discontinue charging immediately.

• Always store battery packs safely out of the reach of children and pets.
• Do not short-circuit the battery pack. This may cause burns and severe 

damage to the battery pack and create the risk of fire.

• Do not burn or puncture the batteries. Toxic materials could be released. 

If eye or skin contact occurs, flush with water.

• Do not expose the charger to water or moisture.
• Do not disassemble the charger.
• Store the battery pack in a dry location, away from heat sources and 

direct sunlight.

• Nickel-Metal Hydride (NiMH) batteries must be recycled or disposed of 

properly.

LiPo Batteries

Lithium Polymer (LiPo) batteries are becoming popular for use in R/C models 
due to their compact size, high energy density, and high-current output; 
however, these types of batteries require special care and handling procedures 
for long life and safe operation. 

Warning:

 

LiPo batteries are intended only for 

advanced users that are educated on the risks associated with LiPo battery 
use. Traxxas does not recommend that anyone under the age of 14 use or 
handle LiPo battery packs without the supervision of a knowledgeable and 
responsible adult. 

Your model is able to use LiPo batteries with nominal voltage not to exceed 
11.1 volts (3S packs). LiPo batteries have a minimum safe discharge voltage 
threshold that should not be exceeded. The Velineon VXL-3m electronic 
speed control is equipped with built-in Low-Voltage Detection that alerts the 
driver when LiPo batteries have reached their minimum voltage (discharge) 
threshold.

 

It is the driver’s responsibility to stop immediately to prevent the 

battery pack from being discharged below its safe minimum threshold.

Low-Voltage Detection on the speed control is just one part of a 
comprehensive plan for safe LiPo battery use.

 

It is critical for you, the user, 

to follow all other instructions supplied by the battery manufacturer and 
the charger manufacturer for proper charging, use, and storage of LiPo 
batteries. Do not attempt to charge LiPo batteries with the Traxxas charger 
included in this package. Make sure you understand how to use your LiPo 
batteries. 

Be aware that Traxxas shall not be liable for any special, indirect, 

incidental, or consequential damages arising out of the installation and/or use 
of LiPo batteries in Traxxas models. 

If you have questions about LiPo battery 

usage, please consult with your local hobby dealer or contact the battery 
manufacturer. 

As a reminder, all batteries should be recycled at the end of 

their useful life. 

DO NOT ATTEMPT TO CHARGE LIPO BATTERIES OR ANY OTHER TYPE OF 
BATTERY WITH THE INCLUDED TRAXXAS CHARGER.

If you have questions about LiPo battery usage, please consult with your local 
hobby dealer or contact the battery manufacturer.

Recycling Your Traxxas Power Cell NiMH Battery

Traxxas strongly encourages you to recycle your Power Cell NiMH battery 
when it has reached the end of its useful life. 

Do not throw your battery in 

the trash.

 All Power Cell NiMH battery packs display the RBRC (Rechargeable 

Battery Recycling Corporation) icon, indicating they are recyclable. To 
find a recycling center near you, ask your local hobby dealer or visit www.
call2recycle.org.

Speed Control

• 

Disconnect the Battery

: Always disconnect the battery from the speed 

control when not in use. 

• 

Transmitter on First

: Switch on your transmitter first before switching 

on the speed control to prevent runaways and erratic performance.

• 

Don’t Get Burned

: The heat sink can get extremely hot, so be careful not 

to touch it until it is cool. Supply adequate airflow for cooling.

• 

Use Stock Connectors

: If you decide to change the battery  

or motor connectors, only change one battery or motor connector at a 
time. This will prevent damage from accidentally mis-wiring the speed 
control. Please note that modified speed controls can be subject to a 
rewiring fee when returned for service. Removing the battery connector 
on the speed control or using connectors with no reverse-polarity 
protection on the speed control will void the product’s warranty.

• 

Insulate the Wires

: Always insulate exposed or damaged wiring with 

heat shrink tubing to prevent short circuits.

• 

No Reverse Voltage

: The speed control is not protected against reverse 

polarity voltage. When changing the battery and/or motor, be sure to 
install the same type of connectors to avoid reverse polarity damage 
to the speed control. Removing the battery connectors on the speed 
control or using the same-gender connectors on the speed control will 
void the product’s warranty.

• 

No Schottky Diodes

: External Schottky diodes are not compatible 

with reversing speed controls. Using a Schottky diode will damage the 
electronic speed control and void the 30-day warranty.

SAFETY PRECAUTIONS

Summary of Contents for E REVO VXL




























Reviews: