background image

2 • REVO PLATINUM EDITION

INTRODUCTION

Thank you for choosing the Traxxas Revo 2008 Platinum Edition. We 
believe you have purchased the most technologically advanced, track-
ready R/C monster truck available. Revo proudly demonstrates Traxxas’ 
passionate commitment to innovation, ultimate performance, and 
unmatched engineering. Revo’s radically advanced suspension, chassis, 
and transmission design takes performance to a higher level. Now with 
over 50 proven championship features, Revo pushes the performance 
envelope even further with track proven accessories. We’ve engineered 
Revo to allow you to experience power, control, and responsiveness 
that surpasses anything else you’ve driven. 

To complete the Revo Platinum Edition for operation you will need; 
two-channel transmitter with mini receiver, starter box, glow igniter, 
charger for the receiver battery pack (3030X recommended), paint, and 
Traxxas Top Fuel. 

We know you’re excited about getting your new Revo on the track, 
but it’s very important that you take some time to read through 
the Owners Manual. This manual contains all the necessary set-up, 
break-in, tuning, and operating procedures that allow you to unlock 
the incredible performance and adjustment potential that Traxxas 
engineers designed into Revo. 

Even if you are an experienced R/C 

enthusiast, it’s important to read and follow the procedures in this 
manual. Revo contains new technologies in the engine, suspension, 
and transmission operation that you may not be familiar with. Pay 
particular attention to the fuel and break-in requirements for the 
engine. 

The advanced design of the TRX 3.3 Racing Engine has a 

special break-in procedure that has been developed and proven  
to produce the best-performing engine possible. Using traditional  
or old-fashioned procedures could reduce engine performance  
and longevity.

We want you to feel confident that you own the best performing truck 
in the market and that it is backed by a team of professionals who aim 
to provide the highest level of factory support possible. Revo is about 
experiencing total performance and satisfaction, not just with your 
truck, but also with the company that stands behind it. We truly want 
you to enjoy your new Revo!

Thank you again for going with Traxxas. 

BEFORE YOU PROCEED

Carefully read and follow all instructions in this and any accompanying 
materials to prevent serious damage to your Revo. Failure to follow 
these instructions will be considered abuse and/or neglect.

Before running your Revo, look over this entire manual and examine the 
truck carefully. If for some reason you decide the Revo is not what you 
wanted, then do not continue any further. Your hobby dealer absolutely 
cannot accept a Revo for return or exchange after it has been run.

Warnings, Helpful Hints, & Cross-References

Throughout this manual, you’ll notice warnings and helpful hints 
identified by the icons below. Be sure to read them!

TRAXXAS SUPPORT

Traxxas support is with you every step of the way. Read 
below to find out how to contact us and what your 
support options are. If you have any questions about your 
Revo or its operation, call the Traxxas Technical Support 
line toll-free at: 1-888-TRAXXAS (1-888-872-9927)* 

Technical support is available Monday through Friday from 8:30 am 
to 9:00 pm central time. Technical assistance is also available at www.
Traxxas.com. You may also e-mail customer support with your question 
at support@Traxxas.com. Join hundreds of Traxxas R/C enthusiasts in 
our online community at www.Traxxas.com.

Traxxas offers a full-service, on-site repair facility to handle any of
your Traxxas service needs. Maintenance, replacement parts, and 
accessories may be purchased directly from Traxxas by phone or online 
at www.BuyTraxxas.com. You can save time, along with shipping and 
handling costs, by purchasing replacement parts from your local dealer. 
Do not hesitate to contact us with any of your product support needs. 
We want you to be thoroughly satisfied with your new Revo!

An important warning about personal safety or avoiding
damage to your model and related components. 

Special advice from Traxxas to make things easier  
and more fun.

Refers you to a page with a related topic.

CONTENTS

INTRODUCTION ............................................................... 2
SAFETY PRECAUTIONS .................................................. 3
TOOLS, SUPPLIES AND REQUIRED EQUIPMENT ........ 3
RADIO INSTALLATION AND BATTERY CARE ................ 4

TIRE GLUING AND BODY DETAILING ............................ 5
THE TRX 3.3 RACING ENGINE ....................................... 6
TUNING ADJUSTMENTS ...............................................11
INDEX .............................................................................18

INTRODUCTION

5304 Manual Work.indd   2

3/12/08   7:47:02 PM

Summary of Contents for Revo 5304 Platinum Edition 2008





















Reviews: