background image

REVO PLATINUM EDITION • 3 

SAFETY PRECAUTIONS

All of us at Traxxas want you to safely enjoy your new Revo. Operate 
your Revo sensibly and with care, and it will be exciting, safe, and fun for 
you and those around you. Failure to operate your Revo in a safe and 
responsible manner may result in property damage and serious injury. 
The precautions outlined in this manual should be strictly followed to 
help ensure safe operation. You alone must see that the instructions are 
followed and the precautions are adhered to. 

Important Points to Remember

• Revo is very fast! The Revo is intended for experienced users with a 

high level of skill. The TRX 3.3 Racing Engine is extremely powerful and 
may require skilled driving to maintain control. 

• The engine, brakes, and exhaust system may become extremely hot 

during use. Be careful not to touch the parts, especially when refueling 
or stopping the engine.

• 

Model engine fuel is dangerous and highly poisonous.

 Always follow 

all directions and precautions printed on the fuel container. Model 
engine fuel is poisonous to humans and animals. Drinking the fuel can 
cause blindness and death. Handle with care and respect.

• Model engine fuel, especially when in a fuel dispensing bottle, may 

look like a cool drink to a child. 

Keep all fuel out of the reach of 

children at all times. Do not place fuel containers on the ground 
where children can reach them. Pay close attention to where you 
place your fuel and fuel bottle while you are driving.

• 

Model engine fuel is flammable. Never allow smoking, sparks, heat 

or flame in the presence of fuel or fuel vapors.

• Prolonged exposure to the engine exhaust can be harmful. Avoid 

breathing the engine exhaust. Always run your Revo outdoors, in a 
well-ventilated area. Never run the engine indoors. 

• Do not operate your Revo at night, or anytime your line of sight to the 

model may be obstructed or impaired in any way.

• Never operate your Revo in crowds of people or busy pedestrian 

areas. Revo is very fast  and could cause injury to those unaware of 
its presence. Keep small children at a safe distance away from the 
operating area.

• Because Revo is controlled by radio, it is subject to radio interference 

from many sources beyond your control. Since radio interference can 
cause momentary loss of control, always allow a safety margin in all 
directions around your model to prevent collisions. 

• The engine can be loud. If the noise makes you uncomfortable, wear 

ear protection. Be considerate of your neighbors by not running your 
model early in the morning or late in the evening.

• Most importantly, use good common sense at all times.

Children under 16 years of age and inexperienced drivers  
should not operate the Revo without the supervision  
of a responsible and knowledgeable (experienced) adult.

Entire contents ©2008 Traxxas. Traxxas, Maxx, Revo, TRX 3.3 Racing Engine, Top 
Fuel, Ready-To-Race, Ready-To-Win, and ProGraphix are trademarks or registered 
trademarks of Traxxas. Other brand names and marks are the property of their 
respective holders and are used only for purposes of identification. No part of this 
manual may be reproduced or distributed in print or electronic media without the 
express written permission of Traxxas.

Traxxas
1100 Klein Road
Plano, Texas 75074
Phone: 972-265-8000
Toll-free 1-888-TRAXXAS

E-mail: support@Traxxas.com

Traxxas U.K.
P.O. Box 1128
Winterbourne, Bristol BS36-2SH
England
Phone: 44-117-956-1002

Internet: www.Traxxas.com

INTRODUCTION

TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT

Supplied Tools and Equipment

• Shock wrench
• 8mm slipper clutch wrench
• 7mm turnbuckle wrench
• 17mm wheel wrench
• Antenna nut tool
• Suspension multi-tool
• 4-way wrench
• Glow plug and wheel nut wrench
• 1.5mm “L” wrench
• 2.0mm “T” wrench
• 2.5mm “L” wrench
• 2.5mm “T” wrench
• 5-cell NiMH RX Power Pack battery
• Suspension tuning shims and hollow balls
• Servo cable “Y” harness
• Front and rear black swaybars (stiffer)
• Spring pairs - Green, White, and Tan
• Shock oil - 40W and 60W
• Clutch bell - 16T
• Spur gears - 36T and 40T

Required Tools and Equipment

• Traxxas Top Fuel

• Fuel dispensing bottle
• Flywheel starter box
• Glow igniter
• After-run oil
• Small flat-blade screwdriver  

for tuning (1/8 inch blade)

• Safety glasses
• Paint for the body 
• 2-channel radio system with mini receiver
• Charger for RX Power Pack battery 

(such as 

the Traxxas TRX Power Charger, part #3030X)

Recommended Equipment

These items are not required for the operation 
of your model, but are a good idea to include in 
any R/C toolbox:

• Hobby knife
• Side cutters and/or needle nose pliers
• Philips screwdriver 
• Soldering iron
• Thin, hobby-quality cyanoacrylate  

instant tire glue (CA glue)

Revo comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer, 
to operate and maintain your model. 

10%  quart  - #5010 
20%  quart  - #5020
33%  quart  - #5030

10%  gallon - #5060 
20%  gallon - #5070
33%  gallon - #5080

5304 Manual Work.indd   3

3/12/08   7:47:04 PM

Summary of Contents for Revo 5304 Platinum Edition 2008





















Reviews: