30
TRBOnet Swift A100 – User Manual
5.2
Memory Card Replacement
If necessary, you can replace the memory card as described below.
To replace the memory card:
1.
Disconnect the unit from the power supply.
2.
Undo the screws and remove the cover from the IP controller.
3.
Unlock the microSD card holder by pulling it in direction A.
4.
Lift the card holder and remove the microSD card.
5.
Insert a replacement microSD card. Ensure that the golden contacts of the
memory card face the contacts of the microSD card holder.
6.
Put down and lock the card holder by pulling it in direction B.
7.
Replace the cover and tighten the screws.
Note: The maximum supported memory size of a microSD card is 32 Gb.
6
Important Note
The manufacturer reserves the right to make changes and/or improvements in
designs and dimensions without notice and without incurring obligation.
