Installation Instructions:
Step 1:
Remove power
from controller first!
Step 2:
Unplug the ribbon cable from the main circuit board.
Step 3:
Connect the Receiver Card into the socket on the main
circuit board where the ribbon cable was removed from.
Step 4:
Plug the ribbon cable in the gray connector on
Receiver Card.
Step 5:
Connect the antenna to the BNC fitting on the Receiver
Card or connect the external mount antenna with coax
cable for max. range.
Step 6:
Re-apply power to your conroller.
Receiver Card for the
Rain Bird
ESP MC
Receiver Card
Ribbon Cable
Antenna
Socket
16
800-275-8558 www.remotecontroltech.com