8
3
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
(Fig. 10)
STEP
2
OPENING UMBRELLA
Position yourself behind umbrella. Squeeze the main frame grip handle and slide handle
midway up main frame (Fig. 4). Release grip handle to lock into place. Slowly turn the crank
lift handle clockwise to open the umbrella (Fig. 5). Crank the handle an extra half turn to
lock the canopy structure into place.
CAUTION:
When cranking umbrella open, if you feel
resistance and the umbrella is not opening, do not force crank. Gently spread umbrella ribs
with hands, then continue to crank open. Once fully opened, squeeze the main frame grip
handle to release lock and continue to slide handle upward until desired height is reached
(Fig. 6).
WARNING:
Do not continue to crank once umbrella canopy is completely open, it may
impair your ability to disengage the tilt lever. Keep hands free of mainframe while moving
grip handle up and down.
STEP
3
UMBRELLA LIGHTS (STARLUX STYLE ONLY)
From the lower backside of the frame, remove plug cap (Fig. 7). Line up power supply
grooves to plug (Fig. 8) and insert power supply into plug. Secure plug by turning locking ring
clockwise (Fig. 9). Connect other end of power supply into wall outlet (Fig. 10).
STEP
7
CLOSING UMBRELLA
Position yourself behind umbrella. Squeeze the main frame grip handle and slide handle
midway down main frame (Fig. 27). Release grip handle to lock into place. Slowly turn the
crank lift handle counter-clockwise until the canopy is fully closed (Fig. 28). Squeeze main
frame grip handle to release lock and continue to slide grip handle downward SLOWLY until
umbrella is fully closed in an upright position (Fig. 29) and locks into position.
NOTE:
Prior to closing ensure that the canopy is in a level (non tilt) position.
Properly store
umbrella when not in use. Close umbrella, tie string around canopy and cover umbrella with
provided protective cover.
(Fig. 27)
(Fig. 28)
(Fig. 29)
CARE AND MAINTENANCE
TO PROPERLY FOLD CANOPY:
The canopy will last longer if you fold it as it was packed and shipped. This technique is
similar to the way a parachute is folded and is especially important when folding the canopy
for seasonal storage or when left in the closed position for an extended period of time.
Using this technique at all times will significantly extend the life of the canopy.
• When the umbrella has been fully closed, stand in front of the canopy
structure and begin the folding process by pulling out two panels
opposite the main frame. Pull the two panels together and roll tight into
the canopy.
• Once rolled tight, pull adjacent panels out one at a time and fold to the
center, alternating sides until all the panels have been pulled out from
the arms and folded into the center.
• Tie string around canopy and cover umbrella with provided protective
cover.
