background image

TREASUREHUNTER3D

Makes underground treasures visible

Instruction manual  21

Detector sounds and environmental  

interferences

When target is detected metal detector device produces sound through internal speaker or headphones when it those are 

connected� User is able to adjust volume by +- buttons on the control box at any time�

VOLUME & TARGET PROXIMITY

NOISE AND FALSE SIGNALS

The detector may pick up unwanted noise signals through air or from the ground and start generating false sound indications, 

loose sensitivity, display wrong Target IDs and produce uncomfortable sound even when there is no real target detected�

Possible sources of such noise are:

• EMI (electromagnetic interference) near electrical power  

  lines (both overhead and underground) or other electrical  

  devices (fences, computer systems, fluorescent lights, 

 

  electric motors or even other metal detector devices)

� 

• Ground noise caused by high levels of mineralization.

Recommendations: 

• try to avoid using detector indoor or near other electrical  

 devices

• keep detector 15m away from other metal detectors

• learn how to ground balance detector to minimize noise 

 

  of soil mineralization (see chapter ALL METAL mode)

• in bad conditions try to lower Sensitivity/Gain and  

  Threshold, even if you lose some sensitivity you will at  

  least be able to continue with search

• When used in Discrimination mode - adjust  

  discrimination level between 60-70

Deep target

Shallow target

No signal

Quiet signal

Loud signal

Quiet signal

A large deep target signal will 

be the same volume as a small 

shallow target signal�

Summary of Contents for GOLD HUNTER





























Reviews: