18
2.2 The use
1.
After removing all interior and exterior packaging materials, use hot water to
clean the aluminum bowl and top lid of ice cream machine before using.
2.
Please correctly connect the input connector clip of the adaptor into the ice
cream machine and then insert the power plug into the power socket. Make sure
the power socket is 100~240 V 50/60Hz AC.
3.
For good taste, by using measuring cup or spoon to ensure that you get the
correct dose for each ingredient with your choice.
4.
Pour 100ml milk, 100ml cream and three spoons sugar into the bowl of ice
cream machine. Do not exceed the maximum limit of 300ml marked on the bowl,
stir them well and then close the lid.
5.
Allow 45min-2 hours (depending of the recipe) of operation and the machine
beeps once done.
6.
Unplug the ice cream machine if it is not to be used for a period of time.
2.3 Taste control
To control the taste of ice cream, adjust the taste control button “Hard” and “Soft” to the
desired taste. Once you press the control button “Hard” or “soft“, the related display will light
up.
Hard
Soft
Stop
2.4 Cooling performance
The temperature at the aluminum bowl will be cooled to minus 18°C in 2 hours (with the
unit empty).
Inside the ice cream machine with full load, it will take about 45 min - 2 hours (depending of
the recipe) to finish the ice cream if the appliance is stabilized at a room temperature of
25°C.
