background image

to insure sAfe PLAY adults must teach children:

● 

not to walk close to, in front of, behind, or between moving items.

● 

not to swing empty swing seats.

● 

not to swing sideways into the path of adjacent swings.

● 

not to use the swing set in a manner other than that for which it is intended.

● 

not to get off the equipment while it is in motion.

● 

not to jump off the tower.

● 

not to stand in the swing seats.

● 

not to swing so high that chains become slack, or above the height of the swing support.

● 

not to jump on a slide.

● 

not to climb on top of the swing support.

● 

not to attach to the swing set any item that is not specifically designed for use with the equipment,

 

such as (but not limited to) jump ropes, clotheslines, pet leashes, cables, and chains. These may

 

become strangulation hazards.

● 

to hold on to swings and climbers with both hands.

● 

to slide feet first, never head first.

● 

to watch for other children while swinging or playing near the swing set.

to also insure sAfe PLAY adults must:

● 

Limit climbing and swinging heights to each child’s ability.

● 

Verify that suspended climbing ropes are secured at both ends.

● 

Verify that suspended climbing ropes cannot be looped back on themselves.

● 

Dress children appropriately for play. use well-fitted shoes that do not have slippery soles.

● 

Avoid ponchos, scarves, hoods, loose fitting clothing, neckties, and any clothing with a drawstring.

 

Serious injury could result should any part of the children’s clothing become entangled in the swing set.

● 

Do not allow children to play wearing helmets.

● 

Remember that children are inventive. When they develop games that are unsafe, be alert and change the rules.

IMPORTANT - PLEASE READ

As fresh lumber acclimates to its new environment, the natural tendencies of the tree can show itself in the form of 

checks, or “cracks” in the lumber. In almost all cases this is normal and it will not affect the structural integrity of your 

play set.
Cosmetic defects that do not affect the structural integrity of the product, or natural defects of wood such as warping, 

checking or any other physical properties of wood that do not present a safety hazard, are not covered by this warranty.
Defects that develop because the product is exposed to extreme climate conditions are not covered by this warranty.
Defects that develop as a result of faulty or improper installation of the product are also not covered by this warranty.
Most cracks are not warrantable, however if you believe that the integrity of your play set is compromised by this 

natural occurrence, please contact the tree frogs swing set Dealer that you purchased your swing set from.

We appreciate your purchase and know that you will enjoy your play system for many years to come.

Summary of Contents for 6-4 Quad Climber































































Reviews: