16
Fusion SKI
bathtub
EN
First run
2
OPERATION TEST
CONTROL PANEL
Emptying key
whirlpool key
disinfection key
temperature key
automatic fill key
ON-OFF key
chromatherapy key
light key
shower head key
HOW TO ACTIVATE FUNCTIONS
POWER ON
The minipool is powered on by connecting it to the mains.
When first turned on, the "ON-OFF" key will be backlit in
blue and all others will be turned off, indicating that all the
functions are
disabled for use.
With the first press of the "ON-OFF" key, its backlight
changes from blue to red, while all the others are blue: the
system is ready for use.
Pressing the "ON-OFF" key again puts the bathtub in sleep
mode, turning off the backlight of the keys and all the ac-
tive functions (except for the drain).
FILLING
Pressing the "
Fill
" key starts the automatic filling of the
bathtub. When pressed, the backlight changes from blue to
red until the bathtub reaches a sufficient level for the whirl-
pool (detected by the SL1 sensor).
If you want to fill the bathtub further to also fill the stor-
age tank (all three sensors detect the water level), it will be
necessary to press the key again.
Filling can be interrupted at any moment by the user
(regardless of the level reached) by pressing the "Fill" key.
During tank filling (second phase), it is only possible to use
the whirlpool function.
WATER
TEMPERATURE
SETTING
The "
Temperature
" key makes it possible to adjust the
temperature of the water in the bathtub and the shower
head.
Every time the “
+
” (increase) or “
-
” (decrease) keys are
pressed, the temperature increases/decreases by
+/-0.5°C
.
To change the value more quickly hold the key down.
