7
Fusion SKI
bathtub
EN
Transport and position
2
POSITIONING
POSITIONING IN THE PLANNED LOCATION
For
installation above ground (freestanding)
, place the bathtub in the installation environment and check its
perfect flatness, essential for proper operation. If it is not level, it is possible to adjust the height of the minipool's
feet to compensate up to a maximum of 1 cm.
For a
recessed installation
, lower the bathtub into the prepared space.
If it was not possible to provide a technical inspection port on all sides of the bathtub, a pneumatic lift is
available (OPTIONAL - to be requested from the Manufacturer) in order to simplify future maintenance
operations. It is recommended to provide a removable inspection hatch "A" positioned on the side where
the bathtub components are situated.
After positioning the bathtub in its prepared space and after having connected the lift, test it.
OPTIONAL
OPTIONAL