Sa
fe
ty
Personnel
07/2019 244156V03_EN
11
2.4
Personnel
2.4.1
Responsibility of personnel
The machine is solely for commercial use. The personnel are therefore
subject to the legal obligations for occupational health and safety.
In addition to the warnings and safety instructions in this manual, the appli-
cable safety, accident prevention and environmental protection regulations
for the area of application must be complied with.
In particular:
-
The personnel must inform themselves about the applicable occupa-
tional health and safety regulations.
-
The personnel must comply with the behavioural requirements issued
in the operating instructions for the operation of the machine at the op-
erating site.
-
The personnel must be aware of the assigned responsibilities for the
operation, maintenance, setting up and cleaning of the machine.
-
The personnel must have read the operating manual completely before
starting work for the first time.
-
The specified protective equipment is used.
-
The personnel must ensure that no unauthorised persons work on the
machine.
-
The personnel must be certain that the machine is in technically fault-
less condition.
-
Before starting production, the personnel must check all safety devices
for completeness and functionality.
Defective safety devices must be reported to the responsible persons.
-
Does not work on or with the machine while under the influence of al-
cohol, drugs or medication affecting reaction.
Summary of Contents for PRIMUS 400
