2023 Fuel EX
3
Derailleur hanger
25Nm
3
2
1
1
Derailleur hanger
—
2
Washer, 30mm
3
Bolt
Tools
•
8mm hex tool
•
Torque wrench (left-hand thread) with 8mm hex bit
WARNING
Do not apply grease to the derailleur hanger or bolt.
This bicycle frame is designed to use a Universal Derailleur
Hanger (UDH).
NOTICE:
The thru axle must be compatible with a UDH
and must be M12x1.0 with a 12.7mm thread.
NOTICE:
The washer is frame-specific. Install only the
washer size specified.
NOTICE:
Do not over-tighten. Over-tightening the bolt
could cause the hanger to break.
For additional information about the UDH, refer to the
SRAM user manual at
