4
ASSEMBLING TENT TO TRAILER
• Clean the rails of trailer if needed and attach the Adhesive Foam Seal (K) to the rails to keep belonging away from
the elements.
• Attach base to trailer by hinges.
• Place the trailer tent onto top of trailer. Make sure entrance to tent is facing rear of trailer and the rail with hinges
welded on is sitting on the right hand side wall of trailer. Mount steel frame to trailer using Hinges (I) supplied.
• Attach gas struts to the trailer using brackets and screws supplied. Adjust the opening height by choosing the
mounting point on the left hand side wall.
• Ensure frame assembly is fully secured by hinges and gas struts.
• Mount the Latches (J) on the left hand side wall of trailer for safety.
TOOLS & ACCESSORIES YOU WILL NEED
• Screwdriver - blade & phillips / cordless drill & bits
• Welding machine
• Spanner 14mm & adjustable wrench 200mm
TRAILER 7’ x 4’
Min/max height from ground - 950mm to 1000mm 0n road
- 1150mm to 1200mm off road
Important
It is recommended that this assembly
requires a minimum of 2 persons.
Ensure appropriate safety equipment is used
during the construction of this product.
2100mm
1300mm
1000mm
2100mm
1300mm
1000mm
on-road
1200mm
off-road
