Vibration Statement
(K) Equals the factor of uncertainty, which allows for variations in measurement and production.
Vibration data figures are tri-axial, which gives total vibration emission.
Risk of Hand Arm Injury
Because of various factors, the range of vibration emission during intended use of these tools is expected to be between
3.5m/s² – 5.88m/s².
The vibration is dependent on the tool model, task, the operators grip, and feed force employed etc.
Noise level measured in accordance with:
EN ISO 15744: 2008
Vibration measured in accordance with:
EN ISO 28927:2012 and EN ISO 20643:2005
Trelawny tools are thoroughly tested under specified conditions in accordance with applicable internationally recognised
standards. When a tool is used on site the conditions may not be the same as those used in our tests.
Trelawny Surface Preparation Technology operates a policy of continuous product development and refinement and
therefore reserves the right to change technical specifications and product designs without giving prior notice.
© Copyright 2009, Trelawny SPT Limited, CV31 1XT. UK All rights reserved. Any unauthorised use or copying of the
contents or part thereof is prohibited. This applies to trademarks, model denominations, part numbers and drawings.
Use only genuine Trelawny spares.
The use of non-Trelawny spare parts invalidates the warranty.
TECHNICAL DATA
