Appendix
A-
5
• Plug one end of the red cable into GateLock’s PC/HUB port and plug the other
end into your router Internet/WAN port. Then move GateLock’s HUB-PC dip
switch to the PC side.
2. Connect your PCs to your router.
3. Plug your GateLock’s power adapter into a power source.
4. Plug your router’s power adapter into a power source.
5. Restart the PC that you will use to configure your router settings.
6. Configure your router’s connection settings.
• Select Obtain an IP address automatically (DHCP) if you want your router to
automatically assign an IP address to each of your PCs.
• If you can only use static IP address, configure your router settings to:
LAN IP address: 192.168.1.1 (or the router’s default IP address)
Subnet mask: 255.255.255.0
WAN IP address: 192.168.253.2
Subnet mask: 255.255.255.0
Gateway: 192.168.253.1
DNS server: 192.168.253.1
Note:
If your router has a PPPoE option, do not enable it. Set your PPPoE settings
on GateLock’s configuration console.
• Save your router settings.
7. Restart every PC connected to your router.
8. Open your Web browser. Enter 192.168.253.1 in the address field to start
configuring your GateLock.
Summary of Contents for Gatelock X200
