Configuring Policy Enforcement and Device Settings
2
-
23
•
Importing the configuration file through the Preconfiguration console or the Web
console.
•
Automatically or manually updating the Network VirusWall Enforcer 2500
program file (versions that require a reset) through the Web console.
If the device detects any of the above actions and failopen is in use, the device
temporarily disconnects ports 1 and 2 for approximately thirty seconds (30s). See
for details.
Note:
The thirty-second (30s) delay only occurs when resetting the device. Powering on
or off the device does not cause this delay.
To reset the device through the preconfiguration menu:
1.
Access the Network VirusWall Enforcer 2500 Preconfiguration console (see
Getting Started Guide
>
Logging on to the Preconfiguration Console
for
instructions).
2.
Select item
8
in the main menu. The System Tasks submenu appears.
3.
Select item
6
to reset the device. A confirmation screen appears.
4.
Select
OK
to continue.
Note:
Refer to the
Getting Started Guide
for detailed information on using the
preconfiguration menu through the Preconfiguration console.
To reset the device with the Reset button:
Press the
Reset
button on the front panel of the device. Network VirusWall
Enforcer 2500 resets.
To reset the device through the Web console:
1.
Click
Administration
.
2.
Click
Device Tasks
.
3.
Click
Reset Now
.
4.
Confirm the reset when prompted.
