Trend Micro™ Network VirusWall™ Enforcer 2500 Administrator’s Guide
2
-
24
Replacing the HTTPS Certificate
Replace the HTTPS Certification from the Web console’s
HTTPS Certificate
screen. Click
Replace Certificate
from
Administration > HTTPS Certificate
.
Use the following command to generate a certificate from a Linux operating system:
openssl req -new -x509 -days 365 -nodes -out FILE_NAME.pem -keyout
FILE_NAME.pem
Configuring IP Address Settings
Configure the
Management IP Address
,
Bridge IP Address
, and
Static Routes
to
minimize transfer of data through an external router. Use this feature as a way to
route the data directly between Network VirusWall Enforcer 2500 and network
segments.
Note:
The procedure is the same for configuring these settings for the failover device,
Administration
>
Failover Settings
, from the Web console.
To configure the Management IP Address settings:
1.
Click
Administration
. The drop down menu displays
2.
Click
IP Address Settings
from the drop down menu. The
IP Address Settings
screen displays with the
Management IP Address
tab selected as default.
3.
Select
Configure IP address using DHCP
or
Configure IP address manually
.
4.
To bind the IP Address to a VLAN ID, select the
VLAN ID
checkbox and type a
VLAN ID.
5.
Click
Save
.
To configure the Bridge IP Address settings:
1.
Click
Administration
. The drop down menu displays
2.
Click
IP Address Settings
from the drop down menu. The
IP Address Settings
screen displays.
3.
Select the
Bridge IP Address(es)
tab. The
Bridge IP Address Settings
screen
displays.
4.
Click
Add
. The
Add Bridge IP Address
screen displays.
