19
WEARING AND USING
AIRPRO MAX
Reposition the crown pad on the headband strap.
Re-attach headband in reverse order.
Refer to
Brow infill removal and installation
section on page
Re-attach face seal press fastener to the mating press fastener on the face seal.
Ensure the elastic strap is routed around the headband.
NOTE: Do not hold or suspend the respirator by the headband or face seal.
QUICK RELEASE HEADBAND ADJUSTMENT
For comfort and security, the quick
release headband must be adjusted
each time prior to entering the
work environment. (Figure 15)
Modify the headband size using the
headband adjuster:
•
To tighten - rotate the adjuster
clockwise.
•
To loosen
–
press the adjuster
and rotate counter-clockwise.
FACE SEAL
Firmly close the face shield, before
adjusting the face seal.
Ensure that the face seal is pulled
under the chin and is not twisted or
folded. (Figure 16).
Figure 15
Figure 16
