Print Server Administration User’s Guide
120
Appendix: Telnet Interface Administration
2.
Select the port you wish to configure. The print server will
display a menu appropriate to the port’s type. For a parallel
port, a menu similar to the following will be displayed:
[Port 1]
1 - Port Name <PS-142634-P1>
2 - Description <HP LaserJet 5L>
3 - Speed <High>
4 - PJL Printer <Yes>
0 - Return to Port Menu
Enter Selection:
For a serial port, the menu will be similar to the following:
[Port 3]
1 - Port Name <PS-142634-S3>
2 - Description <>
3 - Baud Rate <9600>
4 - Data Bits <8>
5 - Stop Bits <1>
6 - Parity Bits <None>
7 - S/W Flow Control <XON/XOFF>
8 - H/W Flow Control <DTR/RTS>
0 - Return to Port Menu
Enter Selection:
3.
To change any of the displayed settings, choose the
appropriate menu item. The print server will prompt for the
new value.
4.
When you are done changing settings for the port, choose 0
to return to the Port Configuration menu.
Summary of Contents for TE100-PS3
Page 6: ......